- 100% waterborne technology
- Very low odor and no VOC
- High-gloss finish
- Cleans up with soap & water
- Sold in Quarts
To achieve the proper finish when free dipping arrows, thin the clear coat if needed with water to avoid bubbles and fish eyes.
Note: True North Arrows Clear Gloss & Clear Flat Arrow & Bow Finishes are not compatible with dye-based stains.
Stir the True North arrow finish gloss or satin well, then add to the dip tube. The product is ready to use, pre-tinned for your convenience. Then I run an old shaft up and down until the finish flows off with no bubbles, they will pop fast. Leave yourself room if you need to add more water so as it runs off nicely, usually I dip 2 or 3 times, usually in a few hours 4 to 6 you can re-dip. You can dip over bare shaft or stain. (just make sure your stain dries 24 hours)
I let the last clear-coat dry and cure for 12-24 hours before I fletch. I recommend Duco cement for feathers.
A quart bottle will fill your big dip tube and leave you enough to refill the upper reservoir.